What command did you use? Each version have 1 to 10 different questions or more. Step 2: Display a summary list of the interfaces on R1. R1 has 6 Ethernet interfaces and R2 has 2 Ethernet interfaces. Each version have 1 to 10 different questions or more. An attack packet passes and no alarm is generated. It is an advanced firewall solution to guard web servers against security threats.
Step 2: Test end-to-end connectivity across the network. Step 2: Test end-to-end connectivity across the network. If no, explain the difference s. Note: The routers in this activity are partially configured. Your task is to find and fix the errors related to the access lists on R1.
Step 3: Display the routing table on R1. You can now configure and power on both routers, and they will be able to communicate. Note: For simplicity in this activity, the switches are not configured; you will not be able to ping them. It is a cloud-based security service to scan traffic for malware and policy enforcement. Review the steps in Part 2. Configure an interface description indicating to which device it is connected.
Configure an interface description indicating to which device it is connected. Unfortunately, the rules that have been implemented are not working correctly. In addition, you should be able to ping the active interfaces on the routers. A router will only send packets to a network listed in the routing table. Objectives Part 1: Display Router Information Part 2: Configure Router Interfaces Part 3: Verify the Configuration Background In this activity, you will use various show commands to display the current state of the router. From there, you can drag two routers from the pane to the right onto the working area the large white space on your screen. Note: For simplicity in this activity, the switches are not configured; you will not be able to ping them.
The latest version is version 6. Gigabit Ethernet interfaces support speeds of up to 1,000,000,000 bits and Fast Ethernet interfaces support speeds of up to 1,000,000 bits. Part 1: Display Router Information Step 1: Display interface information on R1. In addition, you should be able to ping the active interfaces on the routers. From year to year, Cisco has updated many versions with difference questions. Enter the command on each router and answer the following questions: 1 How many serial interfaces are there on R1 and R2? What commands can you use to verify this part of the configuration? While you take online test with netacad.
An attack packet passes and an alarm is generated. Click once on each router, and you will see a cable created between them with a red dot on either end. Part 3: Verify the Configuration Step 1: Use verification commands to check your interface configurations. If a network is not listed, the packet will be dropped. I agree to my information being processed by TechTarget and its to contact me via phone, email, or other means regarding information relevant to my professional interests.
It is a security appliance that provides an all-in-one solution for securing and controlling web traffic. You will secure the switches on the network. Use the show ip route command on both R1 and R2 to view the current routing tables and answer the following questions: 1 How many connected routes uses the C code do you see on each router? The console password is cisco. What command displays the content of the routing table? Enter the command on R1 and answer the following questions: 1 How many connected routes are there uses the C code? It is good practice to configure a description for each interface to help document the network information. No other restrictions should be in place. Each router has 2 serial interfaces.
You will get a cursor that looks somewhat like a taser gun. The latest version is version 6. Which command displays the statistics for all interfaces configured on a router? Note: The serial interfaces are already configured and active. It depends on your instructor creating your class. From year to year, Cisco has updated many versions with difference questions. Finally, you will use commands to verify and test your configurations.
What command did you use? Finally, you will use commands to verify and test your configurations. It is a secure web server specifically designed for cloud computing. You will then use the Addressing Table to configure router Ethernet interfaces. If no, explain the difference s. Some of the configurations are not covered in this course, but are provided to assist you in using verification commands. Some of the configurations are not covered in this course, but are provided to assist you in using verification commands.
This is done so that this activity is 1 consistent with examples shown in the chapter, 2 ready to provide complete output from show commands when the student configures and activates the Ethernet interfaces. There are two Gigabit Ethernet interfaces and 4 Fast Ethernet interfaces. The console password is cisco. Use the information in the Addressing Table to finish the interface configurations for R1 and R2. A normal user packet passes and no alarm is generated.